The "original" sloped double wall aluminum grain trailer by Wilson Trailer is available in both widths and ALL lengths! Experience the reliability of a proven and tested design, rather than the trials of others attempting to duplicate it.
Wilson's Commander model has been serving the grain hauling industry for many years. Most notably the Commander is the first double wall aluminum grain trailer available with a sloped front and rear, and understandably since it is a Wilson, the trailer possesses all the superior quality elements Wilson is known for.
Standard with the original and patented RollerTrap™ – The industry's easiest to use trap opener since 1996. Lightweight, trouble-free, and very low maintenance.
Wilson's open-design king pin area transfers weight to the side rails. With its strong, flexible and clean designs, cross bracing that would otherwise collect debris, add weight and lead to corrosion becomes unnecessary. Unobstructed access to the nose area allows for much easier cleaning and maintenance, plus there is more clearance for truck frames when maneuvering over raised areas.
Wilson uses a Corsol™ coating throughout the king pin assembly. Components treated with Corsol™ become highly chip resistant and galvanically non-conductive so dissimilar metals can be fastened together. This coating permeates the steel to help resist corrosion from the inside out rather than the outside in. For additional protection between dissimilar metals, Wilson adds a polymer material barrier around the perimeter of the king pin component.
Notice the continuation of the standard full length inside skin on the sidewalls. Wilson provides a much cleaner way to haul!
Corsol is a trademark of PRP Industries, Inc.
The smooth one-piece side skin, with corrugations running the full length of the trailer, make the trailer more streamline – Reducing the drag yields more miles per gallon. The one-piece skin also provides greater strength and flexibility in and out of the field. It is available in white on 66" and 72" side heights and black in 66" side heights.
Splice sides are available as a popular option in white, black, pewter metallic and polished stainless steel and are available in all side heights.
Larger diameter rivets with larger heads generates greater, more desirable shear strength. Combine this with the uniqueness of Wilson's one-piece inside and outside wall skins and a state-of-the-art maximum side strength is created.
The deepness of Wilson's rear channel, front channel and side rails is key in the design to provide more strength where it is needed.
Long lasting LED lights are standard for all applications of the tail, turn, and clearance lights on the trailer.
Safer and greater visual of stopping and turning intentions are achieved with Wilson's standard recessed stop/turn lights in the rear header.
Full length inside skins on the sidewalls eliminates material build-up that would otherwise add unnecessary weight in the suspension and kingpin areas. The full-length inside skins play an important part in the structural integrity of the trailers – Structural integrity which is standard on every Wilson grain trailer.
Wilson is standard aluminum landing gear braces. Bracing the landing gear to the "C" channel and not to the slope sheet adds obvious strength. Also, bracing from the rear reduces obstacles for truck mud flap brackets to catch on and allows for a greater swing clearance. A better weight balance is also achieved for those with long wheel base tractors.
Side vent ports, positioned between each set of side posts, allow the sides to breathe, extend the life of the side wall, and also serve as a useful inspection source.
Wilson's two-piece hopper is standard with 2 stiffeners per side plus corner bracing for a stronger hopper less prone to bulge and sag which causes rivets to loosen and pop. The stiffeners also serve as handy knock rails for sticky product.
Designed with low maintenance in mind, Wilson uses a dependable sealed wiring system backed with the best warranty in the industry. No excess or exposed wiring. It is sealed and protected.
Wilson's larger tandem tubes, identical in size, provide more strength in the suspension area. The tubes are undercoated inside and vented to inhibit corrosion. All metal trailer components are coated with Corsol™ anti-corrosive metal treatment and can be top coated with a liquid paint. For additional protection between dissimilar metals, Wilson adds a polymer material barrier to the connection areas of the assembly.
Corsol is a trademark of PRP Industries, Inc.
Wilson grain trailers are standard with Shur-Co's 4500 Series HD electric tarp opener including the SMART1+™ remote, which has Express Mode capabilities. This is the best-performing electric tarp on the market and it comes with Shur-Co's black DiamondCore™ tarp that is backed with a 24-month warranty.
Wilson provides a variety of optional suspensions designed to make the most of gross weight limitations depending on your locale. Choose from the standard tandem axle or optional spread axle and multi-axle configurations. Steel sub frames are standard but corrosion-resistant aluminum sub frames are a very popular lightweight alternative that, depending on suspension specification saves approximately 300 lb. Air ride is always a sought-after option that improves ride and handling.
In addition to the one-piece sidewall, Wilson offers vertical splice sidewalls on 49" centers for the Pacesetter and Commander models. Talk to your Wilson sales representative to specify on your order.
Wilson offers additional sidewall color options in the ever-popular black, Pewter Metallic, Stainless Steel and the new Gun Metal colors. The white color is available in the one-piece sidewall. White and all the other colors are available in our spliced sidewalls.
With a standard hopper clearance of 17", Wilson also offers optional Ag Hoppers with a "true" high ground clearance of 21". Check out the many available hopper options below.